Description Cookie Fuel Skydiving Helmet The open-face Fuel helmet can be ordered as the helmet only for use as a basic, comfortable open-face helmet. Or it can be transformed into a full-on camera helmet with a top-mount, side-mount, cutaway chincup and outside access audible mount. Just as Cookie Composites revolutionised the full-face camera helmet with the G3, the Fuel has done the same for the open-face and POV camera helmet markets. The Cookie Fuel Skydiving Helmet shell is made of a High Impact ABS / Polycarbonate Blend. It comes standard with comfortable chinstrap as well as blank side and top plates. The blank side plates will hold any audible altimeter, but the audible won’t be visible from the outside of the helmet unless the optional audible mount side plate is ordered and installed. The side and top plates all come in black. Size Chart: XS (51-52 cm or 20-20.5 in) Small (52-53 cm or 20.5-20.75 in) Medium (53-55 cm or 20.75-21.5 in) Large (55-57 cm or 21.5-22.25 in) XL (57-59 cm or 22.25-23 in) 2XL (59-61 cm or 23-24 in) To measure your head place a tape measure around the widest part of your head just above the eye brows and ears. If your head measurement is between 56cm to 59cm we strongly suggest testing fitting before making a purchase. Please contact you local DZ, they may have one for you to try on. Cookie Fuel Skydiving Helmet Features: Polycarbonate / ABS blend Shell Dual internal audible mounts for L&B’s Solo II, Optima II and Quattro as well as the Alti-2 Neptune. Ergonomic chin-strap Sizes XS to XXL Black drawstring helmet bag Cookie Fuel Skydiving helmet can be upgraded with separately available options and add-ons as noted below: Optional Side Plate/Mount features include: Visible audible altimeter port for Larsen & Brusgaard Solo II, Optima II and Quattro audible altimeters Visible audible altimeter port for Larsen & Brusgaard Original ProTrack or ProTrack II Visible audible altimeter port for Alti-2 N3 or Atlas Flat Side Mount Plate Cooke Contour Rail Mount (Requires Flat Side Mount Plate) Sony Action Cam Sleeve (Requires Flat Side Mount Plate), AS20/30/100/200 cameras also require Sony Action Cam Original Waterproof Housing Optional Top Plate/Mount features include: Fuel GoPro Top Mount allows you to use the proprietary click-in style GoPro Mounts. Fuel GoPro Roller Mount available for the HERO/HERO2, HERO3, HERO3 /4, HERO 2018, HERO5 Black, HERO6 Black, HERO7 Black or HERO 8. The design of the Fuel GoPro Roller Mount provides a low center of gravity GoPro mounting solution while enclosing the base of the camera to reduce line snags. The design easily allows the skydiver to adjust the viewing camera angle over a 75-degree range. The mount has graduated marks so you can easily set your desired angle of view every time. Manufactured from aircraft grade aluminum with a hard anodized finish. Optional Chincup features include: Fuel Cutaway Chincup is a low profile cutaway system that even under a heavy load can be easily cutaway and avaliable as an optional extra. The cutaway system has been tested in accordance with the FPF standard for camera headgear release systems. The Chincup can be converted without the use of tools to a fixed system that does not cutaway, if desired. Installation instructions for you optional extras: Fuel Cutaway Chincup installation instructions Fuel Mounts Installation Instructions Fuel Flatlock Adaptor Installation Instructions Please be advised **Special Order** Estimated delivery 4-5 weeks Orders can not be part shipped. Should one of your items be on back order it is recommended that you place a separate order should you require the remaining items from your order immediately.
